#                   version: 7.23.2 (stable)
#          factory-software: 7.4.1
#              total-memory: 1024.0MiB
#                       cpu: ARM64
#                 cpu-count: 4
#           total-hdd-space: 1024.0MiB
#         architecture-name: arm64
#                board-name: RB5009UG+S+
#                  platform: MikroTik
#   installed-version: 7.23.2
# 
# software id = 5XLQ-6NH6
#
# model = RB5009UG+S+
# serial number = HFE09330C7J
/interface bridge
add admin-mac=78:9A:18:C4:40:F8 auto-mac=no name=BRDIGE-LAN port-cost-mode=short vlan-filtering=yes
/interface ethernet
set [ find default-name=ether1 ] l2mtu=1514 name="ether1-WAN SW WIS"
set [ find default-name=ether2 ] l2mtu=1514
set [ find default-name=ether3 ] l2mtu=1514 name=ether3-LAN1
set [ find default-name=ether4 ] l2mtu=1514 name=ether4-LAN2
set [ find default-name=ether5 ] l2mtu=1514 name="ether5-TPLINK CAPACITACION"
set [ find default-name=ether6 ] l2mtu=1514
set [ find default-name=ether7 ] l2mtu=1514
set [ find default-name=ether8 ] l2mtu=1514
set [ find default-name=sfp-sfpplus1 ] auto-negotiation=no l2mtu=1514
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=default-dhcp ranges=192.168.88.10-192.168.88.254
add name=dhcp_pool1 ranges=192.168.1.200-192.168.1.254
add name=dhcp_pool2 ranges=192.168.6.20-192.168.6.254
add name=dhcp_pool3 ranges=192.168.9.10-192.168.9.254
add name=dhcp_pool4 ranges=192.168.9.2-192.168.9.254
add name=dhcp_pool5 ranges=192.168.10.2-192.168.10.254
add name=dhcp_pool6 ranges=192.168.10.20-192.168.10.254
add name=dhcp_pool7 ranges=192.168.2.20-192.168.2.254
/ip dhcp-server
add address-pool=dhcp_pool7 interface=BRDIGE-LAN lease-time=10m name=dhcp2
/ip smb users
set [ find default=yes ] disabled=yes
/queue simple
add max-limit=2M/10M name=CLIENTEVLAN10 target=192.168.10.254/32
/routing table
add disabled=no fib name=MARCA-RUTEADOR-13
/snmp community
set [ find default=yes ] name=SNMP-SOMNET
/system logging action
add name=GrafanaLoki remote=172.20.0.254 remote-log-format=syslog remote-port=1514 src-address=172.20.1.83 target=remote
/interface bridge port
add bridge=BRDIGE-LAN comment=defconf interface=ether3-LAN1 internal-path-cost=10 path-cost=10
add bridge=BRDIGE-LAN comment=defconf interface=ether4-LAN2 internal-path-cost=10 path-cost=10
add bridge=BRDIGE-LAN comment=defconf interface=ether6 internal-path-cost=10 path-cost=10
add bridge=BRDIGE-LAN comment=defconf interface=ether7 internal-path-cost=10 path-cost=10
add bridge=BRDIGE-LAN comment=defconf interface=ether8 internal-path-cost=10 path-cost=10
add bridge=BRDIGE-LAN interface="ether5-TPLINK CAPACITACION" internal-path-cost=10 path-cost=10
add bridge=BRDIGE-LAN interface=sfp-sfpplus1 internal-path-cost=10 path-cost=10
/ip firewall connection tracking
set udp-timeout=10s
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface bridge vlan
add bridge=BRDIGE-LAN disabled=yes tagged=sfp-sfpplus1 untagged="ether5-TPLINK CAPACITACION" vlan-ids=111
/interface list member
add comment=defconf interface=BRDIGE-LAN list=LAN
add comment=defconf interface="ether1-WAN SW WIS" list=WAN
/interface ovpn-server server
add mac-address=FE:2E:FB:52:04:D1 name=ovpn-server1
/ip address
add address=10.10.10.1/24 comment=LAN interface=BRDIGE-LAN network=10.10.10.0
add address=192.168.1.1/24 comment=WIRELESS interface="ether5-TPLINK CAPACITACION" network=192.168.1.0
add address=172.20.1.83/16 comment=WAN interface="ether1-WAN SW WIS" network=172.20.0.0
add address=38.123.220.178/24 interface="ether1-WAN SW WIS" network=38.123.220.0
add address=192.168.2.1/24 comment="DHCP Bridge" interface=BRDIGE-LAN network=192.168.2.0
add address=38.58.38.7/24 interface=ether2 network=38.58.38.0
/ip dhcp-server network
add address=192.168.1.0/24 gateway=192.168.1.1
add address=192.168.2.0/24 gateway=192.168.2.1
/ip dns
set allow-remote-requests=yes servers=1.1.1.2,1.0.0.2
/ip dns static
add address=192.168.88.1 comment=defconf name=router.lan type=A
add address=192.168.10.254 name="CLIENTE254'VLan10" type=A
/ip firewall address-list
add address=192.168.10.254 list=CLIENTEVLAN10
add address=192.168.10.253 list=CLIENTEVLAN10
add address=192168.10.254 list=Morosos
add address=192.168.10.253 list=Morosos
/ip firewall filter
add action=drop chain=forward comment="BLOQUEAR ACCESO A RED " disabled=yes dst-address=172.20.0.0/16 src-address=192.168.0.0/16
add action=drop chain=forward comment="BLOQUEAR ACCESO A RED" disabled=yes dst-address=172.20.0.0/16 src-address=10.10.0.0/16
/ip firewall mangle
add action=mark-routing chain=prerouting new-routing-mark=MARCA-RUTEADOR-13 src-address=10.10.10.13
/ip firewall nat
add action=masquerade chain=srcnat out-interface="ether1-WAN SW WIS"
add action=masquerade chain=srcnat out-interface=ether2
/ip ipsec profile
set [ find default=yes ] dpd-interval=2m dpd-maximum-failures=5
/ip route
add check-gateway=ping disabled=no distance=30 dst-address=0.0.0.0/0 gateway=172.20.1.1 routing-table=main scope=30 target-scope=10
add check-gateway=ping disabled=no distance=20 dst-address=0.0.0.0/0 gateway=38.123.220.1 routing-table=main scope=30 target-scope=10
add disabled=no distance=1 dst-address=172.18.61.0/24 gateway=172.20.3.248 pref-src="" routing-table=main scope=30 target-scope=10
add check-gateway=ping disabled=no distance=10 dst-address=0.0.0.0/0 gateway=38.58.38.1 routing-table=main
/ip service
set ftp disabled=yes
set telnet disabled=yes
set www port=8080
set api disabled=yes
set api-ssl disabled=yes
set ssh port=46825
/ipv6 firewall address-list
add address=::/128 comment="defconf: unspecified address" list=bad_ipv6
add address=::1/128 comment="defconf: lo" list=bad_ipv6
add address=fec0::/10 comment="defconf: site-local" list=bad_ipv6
add address=::ffff:0.0.0.0/96 comment="defconf: ipv4-mapped" list=bad_ipv6
add address=::/96 comment="defconf: ipv4 compat" list=bad_ipv6
add address=100::/64 comment="defconf: discard only " list=bad_ipv6
add address=2001:db8::/32 comment="defconf: documentation" list=bad_ipv6
add address=2001:10::/28 comment="defconf: ORCHID" list=bad_ipv6
add address=3ffe::/16 comment="defconf: 6bone" list=bad_ipv6
/ipv6 firewall filter
add action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=invalid
add action=accept chain=input comment="defconf: accept ICMPv6" protocol=icmpv6
add action=accept chain=input comment="defconf: accept UDP traceroute" port=33434-33534 protocol=udp
add action=accept chain=input comment="defconf: accept DHCPv6-Client prefix delegation." dst-port=546 protocol=udp src-address=fe80::/10
add action=accept chain=input comment="defconf: accept IKE" dst-port=500,4500 protocol=udp
add action=accept chain=input comment="defconf: accept ipsec AH" protocol=ipsec-ah
add action=accept chain=input comment="defconf: accept ipsec ESP" protocol=ipsec-esp
add action=accept chain=input comment="defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
add action=drop chain=input comment="defconf: drop everything else not coming from LAN" in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept established,related,untracked" connection-state=established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid
add action=drop chain=forward comment="defconf: drop packets with bad src ipv6" src-address-list=bad_ipv6
add action=drop chain=forward comment="defconf: drop packets with bad dst ipv6" dst-address-list=bad_ipv6
add action=drop chain=forward comment="defconf: rfc4890 drop hop-limit=1" hop-limit=equal:1 protocol=icmpv6
add action=accept chain=forward comment="defconf: accept ICMPv6" protocol=icmpv6
add action=accept chain=forward comment="defconf: accept HIP" protocol=139
add action=accept chain=forward comment="defconf: accept IKE" dst-port=500,4500 protocol=udp
add action=accept chain=forward comment="defconf: accept ipsec AH" protocol=ipsec-ah
add action=accept chain=forward comment="defconf: accept ipsec ESP" protocol=ipsec-esp
add action=accept chain=forward comment="defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
add action=drop chain=forward comment="defconf: drop everything else not coming from LAN" in-interface-list=!LAN
/ipv6 nd
set [ find default=yes ] advertise-dns=yes
/radius
add address=172.20.6.1 require-message-auth=no secret=Fr3eR4d!u5 service=login timeout=300ms
/snmp
set enabled=yes
/system clock
set time-zone-name=America/Mexico_City
/system identity
set name=RT-CAPACITACION
/system logging
add action=GrafanaLoki prefix=172.20.1.83 topics=info
add action=GrafanaLoki prefix=172.20.1.83 topics=critical
add action=GrafanaLoki prefix=172.20.1.83 topics=error
add action=GrafanaLoki prefix=172.20.1.83 topics=warning
/system ntp client
set enabled=yes
/system ntp client servers
add address=0.mx.pool.ntp.org
add address=1.mx.pool.ntp.org
/tool graphing interface
add
/tool graphing resource
add
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN
/tool sniffer
set file-name=capacita.cap filter-direction=rx filter-interface=ether2
/user aaa
set default-group=full use-radius=yes