# version: 7.21.3 (stable) # factory-software: 7.5 # total-memory: 1024.0MiB # cpu: ARM64 # cpu-count: 4 # total-hdd-space: 1024.0MiB # architecture-name: arm64 # board-name: RB5009UPr+S+ # platform: MikroTik # installed-version: 7.21.3 # # software id = SXYL-AF7I # # model = RB5009UPr+S+ # serial number = HF409EB6TRJ /interface bridge add admin-mac=78:9A:18:6C:05:D9 auto-mac=no comment=defconf name=BRLAN port-cost-mode=short /interface ethernet set [ find default-name=ether1 ] l2mtu=1514 poe-out=forced-on set [ find default-name=ether2 ] l2mtu=1514 set [ find default-name=ether3 ] l2mtu=1514 set [ find default-name=ether4 ] l2mtu=1514 set [ find default-name=ether5 ] l2mtu=1514 poe-out=off set [ find default-name=ether6 ] l2mtu=1514 poe-out=off set [ find default-name=ether7 ] l2mtu=1514 set [ find default-name=ether8 ] l2mtu=1514 set [ find default-name=sfp-sfpplus1 ] l2mtu=1514 /interface list add comment=defconf name=WAN add comment=defconf name=LAN /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /ip pool add name=default-dhcp ranges=192.168.88.10-192.168.88.254 /snmp community set [ find default=yes ] name=SNMP-SOMNET /system logging action add name=GrafanaLoki remote=172.20.0.254 remote-log-format=syslog remote-port=1514 src-address=172.20.2.137 target=remote /interface bridge port add bridge=BRLAN comment=defconf interface=ether3 internal-path-cost=10 path-cost=10 add bridge=BRLAN comment=defconf interface=ether4 internal-path-cost=10 path-cost=10 add bridge=BRLAN comment=defconf interface=ether5 internal-path-cost=10 path-cost=10 add bridge=BRLAN comment=defconf interface=ether6 internal-path-cost=10 path-cost=10 add bridge=BRLAN comment=defconf interface=ether7 internal-path-cost=10 path-cost=10 add bridge=BRLAN comment=defconf interface=ether8 internal-path-cost=10 path-cost=10 add bridge=BRLAN comment=defconf interface=sfp-sfpplus1 internal-path-cost=10 path-cost=10 add bridge=BRLAN ingress-filtering=no interface=*B internal-path-cost=10 multicast-router=disabled path-cost=10 /ip firewall connection tracking set udp-timeout=10s /ip neighbor discovery-settings set discover-interface-list=LAN /interface list member add comment=defconf interface=BRLAN list=LAN add comment=defconf interface=ether1 list=WAN /interface ovpn-server server add mac-address=FE:99:F6:64:1A:47 name=ovpn-server1 /ip address add address=172.20.2.137/16 interface=BRLAN network=172.20.0.0 /ip dhcp-client add comment=defconf default-route-tables=main disabled=yes interface=ether1 /ip dhcp-server add address-pool=default-dhcp disabled=yes interface=BRLAN lease-time=10m name=defconf /ip dns set allow-remote-requests=yes servers=1.1.1.2,1.0.0.2 /ip dns static add address=192.168.88.1 comment=defconf name=router.lan type=A /ip firewall filter add action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=established,related,untracked disabled=yes add action=drop chain=input comment="defconf: drop invalid" connection-state=invalid disabled=yes add action=accept chain=input comment="defconf: accept ICMP" disabled=yes protocol=icmp add action=accept chain=input comment="defconf: accept to local loopback (for CAPsMAN)" disabled=yes dst-address=127.0.0.1 add action=drop chain=input comment="defconf: drop all not coming from LAN" disabled=yes in-interface-list=!LAN add action=accept chain=forward comment="defconf: accept in ipsec policy" disabled=yes ipsec-policy=in,ipsec add action=accept chain=forward comment="defconf: accept out ipsec policy" disabled=yes ipsec-policy=out,ipsec add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related disabled=yes add action=accept chain=forward comment="defconf: accept established,related, untracked" connection-state=established,related,untracked disabled=yes add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid disabled=yes add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat connection-state=new disabled=yes in-interface-list=WAN /ip firewall nat add action=masquerade chain=srcnat comment="defconf: masquerade" disabled=yes ipsec-policy=out,none out-interface-list=WAN /ip ipsec profile set [ find default=yes ] dpd-interval=2m dpd-maximum-failures=5 /ip route add disabled=no dst-address=0.0.0.0/0 gateway=172.20.1.1 routing-table=main /ip service set ftp disabled=yes set telnet disabled=yes set www port=8080 set api disabled=yes set api-ssl disabled=yes set ssh port=46825 /ipv6 firewall address-list add address=::/128 comment="defconf: unspecified address" list=bad_ipv6 add address=::1/128 comment="defconf: lo" list=bad_ipv6 add address=fec0::/10 comment="defconf: site-local" list=bad_ipv6 add address=::ffff:0.0.0.0/96 comment="defconf: ipv4-mapped" list=bad_ipv6 add address=::/96 comment="defconf: ipv4 compat" list=bad_ipv6 add address=100::/64 comment="defconf: discard only " list=bad_ipv6 add address=2001:db8::/32 comment="defconf: documentation" list=bad_ipv6 add address=2001:10::/28 comment="defconf: ORCHID" list=bad_ipv6 add address=3ffe::/16 comment="defconf: 6bone" list=bad_ipv6 /ipv6 firewall filter add action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=established,related,untracked add action=drop chain=input comment="defconf: drop invalid" connection-state=invalid add action=accept chain=input comment="defconf: accept ICMPv6" protocol=icmpv6 add action=accept chain=input comment="defconf: accept UDP traceroute" port=33434-33534 protocol=udp add action=accept chain=input comment="defconf: accept DHCPv6-Client prefix delegation." dst-port=546 protocol=udp src-address=fe80::/10 add action=accept chain=input comment="defconf: accept IKE" dst-port=500,4500 protocol=udp add action=accept chain=input comment="defconf: accept ipsec AH" protocol=ipsec-ah add action=accept chain=input comment="defconf: accept ipsec ESP" protocol=ipsec-esp add action=accept chain=input comment="defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec add action=drop chain=input comment="defconf: drop everything else not coming from LAN" in-interface-list=!LAN add action=accept chain=forward comment="defconf: accept established,related,untracked" connection-state=established,related,untracked add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid add action=drop chain=forward comment="defconf: drop packets with bad src ipv6" src-address-list=bad_ipv6 add action=drop chain=forward comment="defconf: drop packets with bad dst ipv6" dst-address-list=bad_ipv6 add action=drop chain=forward comment="defconf: rfc4890 drop hop-limit=1" hop-limit=equal:1 protocol=icmpv6 add action=accept chain=forward comment="defconf: accept ICMPv6" protocol=icmpv6 add action=accept chain=forward comment="defconf: accept HIP" protocol=139 add action=accept chain=forward comment="defconf: accept IKE" dst-port=500,4500 protocol=udp add action=accept chain=forward comment="defconf: accept ipsec AH" protocol=ipsec-ah add action=accept chain=forward comment="defconf: accept ipsec ESP" protocol=ipsec-esp add action=accept chain=forward comment="defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec add action=drop chain=forward comment="defconf: drop everything else not coming from LAN" in-interface-list=!LAN /ipv6 nd set [ find default=yes ] advertise-dns=yes /radius add address=172.20.6.1 secret=Fr3eR4d!u5 service=login src-address=172.20.2.137 /snmp set enabled=yes trap-version=2 /system clock set time-zone-name=America/Mexico_City /system identity set name=MK-HUEREJE /system logging add action=GrafanaLoki prefix=172.20.2.137 topics=critical add action=GrafanaLoki prefix=172.20.2.137 topics=error add action=GrafanaLoki prefix="172.20.2.137 " topics=info add action=GrafanaLoki prefix=172.20.2.137 topics=warning /system ntp client set enabled=yes /system ntp client servers add address=193.182.111.13 /tool graphing interface add /tool graphing resource add /tool mac-server set allowed-interface-list=LAN /tool mac-server mac-winbox set allowed-interface-list=LAN /tool sniffer set file-name=Cpv.cap filter-interface=ether1 memory-limit=1000KiB /user aaa set default-group=full use-radius=yes