# version: 7.20.1 (stable) # factory-software: 7.5 # total-memory: 1024.0MiB # cpu: ARM64 # cpu-count: 4 # total-hdd-space: 1024.0MiB # architecture-name: arm64 # board-name: RB5009UPr+S+ # platform: MikroTik # installed-version: 7.20.1 # # software id = D9GF-6D5M # # model = RB5009UPr+S+ # serial number = HF4096YPHVQ /interface bridge add admin-mac=78:9A:18:6B:F9:BE auto-mac=no comment=defconf name=bridge port-cost-mode=short /interface ethernet set [ find default-name=ether3 ] name="ether3-LAN WENCESLAO" poe-out=off set [ find default-name=ether4 ] name="ether4-WAN SN MARTIN" set [ find default-name=ether5 ] auto-negotiation=no disabled=yes name="ether5 - WAVE" poe-out=forced-on /interface list add comment=defconf name=WAN add comment=defconf name=LAN /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /snmp community set [ find default=yes ] name=SNMP-SOMNET /system logging action add name=GrafanaLoki remote=172.20.0.254 remote-log-format=syslog remote-port=1514 src-address=172.20.4.122 target=remote /interface bridge port add bridge=bridge comment=defconf interface="ether3-LAN WENCESLAO" internal-path-cost=10 path-cost=10 add bridge=bridge comment=defconf interface="ether4-WAN SN MARTIN" internal-path-cost=10 path-cost=200 add bridge=bridge interface="ether5 - WAVE" /ip firewall connection tracking set udp-timeout=10s /ip neighbor discovery-settings set discover-interface-list=all /ipv6 settings set disable-ipv6=yes /interface list member add comment=defconf interface=bridge list=LAN add comment=defconf interface=ether1 list=WAN /interface ovpn-server server add mac-address=FE:5C:57:6B:F9:AC name=ovpn-server1 /ip address add address=172.20.4.122/16 interface=bridge network=172.20.0.0 /ip dns set servers=1.1.1.2,1.0.0.2 /ip dns static add address=192.168.88.1 comment=defconf name=router.lan type=A /ip ipsec profile set [ find default=yes ] dpd-interval=2m dpd-maximum-failures=5 /ip route add disabled=no dst-address=0.0.0.0/0 gateway=172.20.1.1 routing-table=main suppress-hw-offload=no /ip service set ftp disabled=yes set telnet disabled=yes set api disabled=yes set api-ssl disabled=yes set ssh port=46825 /ipv6 firewall address-list add address=::/128 comment="defconf: unspecified address" list=bad_ipv6 add address=::1/128 comment="defconf: lo" list=bad_ipv6 add address=fec0::/10 comment="defconf: site-local" list=bad_ipv6 add address=::ffff:0.0.0.0/96 comment="defconf: ipv4-mapped" list=bad_ipv6 add address=::/96 comment="defconf: ipv4 compat" list=bad_ipv6 add address=100::/64 comment="defconf: discard only " list=bad_ipv6 add address=2001:db8::/32 comment="defconf: documentation" list=bad_ipv6 add address=2001:10::/28 comment="defconf: ORCHID" list=bad_ipv6 add address=3ffe::/16 comment="defconf: 6bone" list=bad_ipv6 /ipv6 firewall filter add action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=established,related,untracked add action=drop chain=input comment="defconf: drop invalid" connection-state=invalid add action=accept chain=input comment="defconf: accept ICMPv6" protocol=icmpv6 add action=accept chain=input comment="defconf: accept UDP traceroute" port=33434-33534 protocol=udp add action=accept chain=input comment="defconf: accept DHCPv6-Client prefix delegation." dst-port=546 protocol=udp src-address=fe80::/10 add action=accept chain=input comment="defconf: accept IKE" dst-port=500,4500 protocol=udp add action=accept chain=input comment="defconf: accept ipsec AH" protocol=ipsec-ah add action=accept chain=input comment="defconf: accept ipsec ESP" protocol=ipsec-esp add action=accept chain=input comment="defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec add action=drop chain=input comment="defconf: drop everything else not coming from LAN" in-interface-list=!LAN add action=accept chain=forward comment="defconf: accept established,related,untracked" connection-state=established,related,untracked add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid add action=drop chain=forward comment="defconf: drop packets with bad src ipv6" src-address-list=bad_ipv6 add action=drop chain=forward comment="defconf: drop packets with bad dst ipv6" dst-address-list=bad_ipv6 add action=drop chain=forward comment="defconf: rfc4890 drop hop-limit=1" hop-limit=equal:1 protocol=icmpv6 add action=accept chain=forward comment="defconf: accept ICMPv6" protocol=icmpv6 add action=accept chain=forward comment="defconf: accept HIP" protocol=139 add action=accept chain=forward comment="defconf: accept IKE" dst-port=500,4500 protocol=udp add action=accept chain=forward comment="defconf: accept ipsec AH" protocol=ipsec-ah add action=accept chain=forward comment="defconf: accept ipsec ESP" protocol=ipsec-esp add action=accept chain=forward comment="defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec add action=drop chain=forward comment="defconf: drop everything else not coming from LAN" in-interface-list=!LAN /radius add address=172.20.6.1 secret=Fr3eR4d!u5 service=login src-address=172.20.4.122 /snmp set enabled=yes trap-version=2 /system clock set time-zone-name=America/Mexico_City /system identity set name=MK-TEMOAYA-WENCESLAO /system logging add action=GrafanaLoki prefix=172.20.4.122 topics=critical add action=GrafanaLoki prefix=172.20.4.122 topics=error add action=GrafanaLoki prefix=172.20.4.122 topics=info add action=GrafanaLoki prefix=172.20.4.122 topics=warning /system ntp client set enabled=yes /system ntp client servers add address=0.mx.pool.ntp.org add address=1.mx.pool.ntp.org /tool graphing interface add /tool graphing resource add /tool mac-server set allowed-interface-list=LAN /tool mac-server mac-winbox set allowed-interface-list=LAN /user aaa set default-group=full use-radius=yes